Conquer large surveying or mapping projects in a fraction of the time.

Significantly reduce your time spent on projects. Deliver unparalleled data quality. Become invaluable to your clients’ success.

Raise Your Expectations.

mdMapper3000DµoG VHR aaS is the flagship mdMapper system. With this aerial surveying equipment, you’ll achieve the highest level of data accuracy currently possible, cover more ground in one flight, use less people and equipment on jobs – all without using ground control points.

In addition to this system, Microdrones offers a full range of mapping systems that meet your application, at your budget.


mdMapper3000DµoG VHR aaS

The mdMapper3000DµoG VHR aaS combines the lifting power, resilience and efficiency of the Microdrones md4-3000 aircraft platform, with a perfectly integrated Phase One camera and the power of direct georeferencing.

QUICK SPECS
 
  • Sensor: PhaseOne iXM-100 (100 megapixel camera) 
     
  • DμoG technology provides two IMUs, one on the aircraft, and one in the payload.
     
  • Georeferencing method: Optimized aerial triangulation using GNSS-Inertial solution
     
  • Enables high altitude corridor and area mapping.

LEARN MORE


mdMapper3000DµoG aaS

mdMapper3000DµoG aaS will help you deliver unparalleled data quality in less time you’ll achieve the highest level of data accuracy currently possible, cover more ground in one flight, use fewer people and less equipment on jobs – all without using ground control points.

QUICK SPECS
  • DμoG technology provides two IMUs, one on the aircraft, and one in the payload.
     
  • Area covered in one battery charge: up to 200 ac (80 ha)
     
  • Sensor: Sony RX1R II
     
  • Optimized aerial triangulation using GNSS-Inertial solution
     
  • Enables corridor mapping

LEARN MORE


mdMapper3000DµoG Oblique aaS

Our customers wanted our dual IMU direct georeferencing mapping power, integrated with a gimbal to capture oblique imagery. 

Meet mdMapper3000DµoG Oblique aaS!

QUICK SPECS
  • DμoG technology provides two IMUs, one on the aircraft, and one in the payload. 
     
  • 42.4 megapixel camera paired with a custom, lightweight, vibration-free, gimbal mount to adjust for your oblique mapping and surveying applications. 
     
  • Enables high wall mapping 
     

LEARN MORE


mdMapper3000DµoG 3D aaS

mdMapper3000DμoG 3D aaS fills a niche where traditional manned aircraft 3D mapping can’t get close enough to the subject to get the exacting detail that you demand.

You will capture all angles and surfaces of your subject with an array of five cameras, seamlessly working together, and integrated into the processing workflow, all backed with the power of dual IMU direct georeferencing.

QUICK SPECS:
  • DμoG technology provides two IMUs, one on the aircraft, and one in the payload. 
     
  • 5 cameras all integrated to collect data from all angles: nadir, front, back, left and right for a combined 120mp 
     
  • Enables 3D modeling and high wall mapping 
     

LEARN MORE



mdMapper1000DG aaS

Microdrones mdMapper1000DG Integrated System low front view

Our mdMapper1000DG aaS helps experts in surveying and mapping to cut cost, save time, and push limits – without GCPS.

QUICK SPECS
 
  • Flight time: up to 45 minutes depending on conditions
     
  • Area covered in one battery charge: up to 200 ac (80 ha) 
     
  • Sensor: Sony RX1R II (42.4 megapixel camera) 
     
  • Inertial Measurement Unit (IMU): Applanix APX-15-L UAV 
     
  • Georeferencing method: Direct georeferencing technology with Nadir mount
     
  • Enables corridor mapping

LEARN MORE


mdMapper1000DG 3D aaS

mdMapper1000DG 3D aaS is a fully integrated drone mapping system that can be used for high wall mapping and 3D modeling.

You can model fine details, texture and all sides of structures in three dimensions. 

QUICK SPECS
  • 5 cameras all integrated to collect data from all angles: nadir, front, back, left and right for a combined 120mp 
     
  • Enables 3D modeling and high wall mapping 
     

LEARN MORE