CONQUER LARGE MAPPING AND SURVEYING PROJECTS IN A FRACTION OF THE TIME.

Deploy the most extreme photogrammetry, LiDAR and 3D sensor technology. You'll deliver unparalleled data quality on every project and become invaluable to your clients’ success.

Raise Your Expectations.

Extend your data collection reach from high above or collect extreme point density when flying closer to the ground.

The Microdrones expert drone line uses the lifting power, resilience and efficiency of the Microdrones md4-3000 aircraft platform to carry the most powerful sensor technology on the market today.


mdLiDAR3000LR

The mdLiDAR3000LR is the most powerful drone LiDAR system ever. You will extend your data collection reach from high above or collect extreme point density when flying closer to the ground.

QUICK SPECS
  • LiDAR Sensor: Riegl VUX-1UAV
     
  • Accuracy of up to 10 mm survey-grade accuracy
     
  • Scan speed: up to 200 scans per second
     

LEARN MORE


mdLiDAR3000DL

The mdLiDAR3000DL combines our robust and field proven md4-3000 airframe, with a highly precise and accurate Riegl miniVUX-1DL payload, you can capture ultra dense LiDAR data quickly and safely in the field, and then turn it into a 3D colorized point cloud back at the office or on your laptop.

QUICK SPECS
 
  • LiDAR Sensor: Riegl miniVUX-1DL
     
  • Camera: Sony RX1R II
     
  • Georeferencing: Trimble APX-20 UAV DG
     

LEARN MORE


mdLiDAR3000

Microdrones md4-3000 mdLiDAR3000 UAV lower left side view

The mdLiDAR3000 uses the lifting power, resilience and efficiency of the Microdrones aircraft platform to carry a perfectly integrated Riegl miniVUX‑3UAV and a Sony RX1R II camera. mdLiDAR3000 is an end-to-end LiDAR solution combining a drone, a LiDAR payload, a fully integrated software workflow, and world class support to consistently provide quality deliverables.

QUICK SPECS
 
  • Point Density of 130 pts/m² when flown at 40 m (130 ft) at a speed of 3 m/s
     
  • Sensor: Riegl & Sony

LEARN MORE


mdMapper3000DµoG VHR

The mdMapper3000DµoG VHR combines the lifting power, resilience and efficiency of the Microdrones md4-3000 aircraft platform, with a perfectly integrated Phase One camera and the power of direct georeferencing.

QUICK SPECS
 
  • Sensor: PhaseOne iXM-100 (100 megapixel camera) 
     
  • DμoG technology provides two IMUs, one on the aircraft, and one in the payload
     
  • Georeferencing method: Optimized aerial triangulation using GNSS-Inertial solution
     
  • Enables high altitude corridor and area mapping

LEARN MORE


mdMapper3000DµoG

mdMapper3000DµoG will help you deliver unparalleled data quality in less time you’ll achieve the highest level of data accuracy currently possible, cover more ground in one flight, use fewer people and less equipment on jobs – all without using ground control points.

QUICK SPECS
  • DμoG technology provides two IMUs, one on the aircraft, and one in the payload.
     
  • Area covered in one battery charge: up to 200 ac (80 ha)
     
  • Sensor: Sony RX1R II
     
  • Optimized aerial triangulation using GNSS-Inertial solution
     
  • Enables corridor mapping

LEARN MORE


mdMapper3000DµoG 3D

mdMapper3000DμoG 3D fills a niche where traditional manned aircraft 3D mapping can’t get close enough to the subject to get the exacting detail that you demand.

You will capture all angles and surfaces of your subject with an array of five cameras, seamlessly working together, and integrated into the processing workflow, all backed with the power of dual IMU direct georeferencing.

QUICK SPECS:
  • DμoG technology provides two IMUs, one on the aircraft, and one in the payload
     
  • 5 cameras all integrated to collect data from all angles: nadir, front, back, left and right for a combined 120mp 
     
  • Enables 3D modeling and high wall mapping 
     

LEARN MORE